SHSubjectHub

AQA GCSE Combined Science: Trilogy (8464) · Spec Physics 6.3

P3 Particle model of matter

Read the notes, then try the questions. Each one is marked the moment you press Check, and shows the right answer and why.

Key ideas

  • Density = mass ÷ volume. Particles in a solid are close together and vibrate, in a liquid they are close and move around, and in a gas they are far apart and move quickly.
  • In a change of state the mass stays the same because the particles are the same. The change is physical, not chemical, and can be reversed.
  • Internal energy is the total kinetic and potential energy of the particles. Heating raises it, either by raising the temperature or by changing the state.
  • Specific latent heat is the energy needed to change the state of 1 kg of a substance without a change of temperature. The graph of temperature against time is flat during a change of state.

Key terms

Density
Mass per unit volume of a substance.
Internal energy
The total energy stored by the particles of a system.
Specific latent heat
The energy to change the state of 1 kg of a substance with no change in temperature.
Sublimation
A solid changing straight to a gas.

Common mistakes

  • Saying particles get bigger when a substance is heated. The particles stay the same size; they move or vibrate faster, and the spacing grows.
  • Using g with m³ or kg with cm³ in a density sum. Keep the units matching: g with cm³, or kg with m³.

Exam tip

On a heating curve, the flat sections are where the substance is changing state and the energy goes to breaking bonds, not raising the temperature.

Free practice questions

7 questions, 13 marks. Answer, then press Check. The marking guide explains how the marks are worked out. Nothing is saved.

  1. Question 1 · Multiple choice[1 mark]

    1.5 kg of water warms from 15 °C to 55 °C. Its specific heat capacity is 4200 J/kg °C. How much energy is transferred?

  2. Question 2 · True or false[1 mark]

    True or false: Heating a substance always makes its temperature rise.

  3. Question 3 · Fill the gaps[1 mark]

    Heating a gas in a sealed rigid container makes its pressure ___.

    Word bank: decrease · increase · disappear · stay the same

  4. Question 4 · Matching[3 marks]

    Draw one line from each state of matter to its particle description.

  5. Question 5 · Choose more than one[2 marks]

    Tick TWO changes during which the temperature of the substance stays constant.

    Choose 2.

  6. Question 6 · Put in order[1 mark]

    Put these steps in order to explain why heating a gas in a sealed rigid container raises its pressure.

    Use the arrows to put these in the right order, first at the top.

    1. 1The particles move faster on average
    2. 2The force on each unit of wall area rises, so the pressure rises
    3. 3The particles hit the container walls more often and harder
    4. 4The gas is heated, so its particles gain kinetic energy
  7. Question 7 · Sort into groups[4 marks]

    Sort each situation by the equation that gives the energy needed.

    Warming soup from 20 °C to 90 °C

    Cooling hot copper from 90 °C to 30 °C

    Condensing steam at 100 °C into water at 100 °C

    Melting ice at 0 °C into water at 0 °C