SHSubjectHub

AQA GCSE Combined Science: Trilogy (8464) · Spec Required practicals Chemistry Paper 2

Required practicals, Chemistry Paper 2

Read the notes, then try the questions. Each one is marked the moment you press Check, and shows the right answer and why.

Key ideas

  • Rates: measure the volume of gas collected or the time for a cross to disappear. Change only one variable, such as concentration or temperature.
  • Chromatography: draw the start line in pencil, use a suitable solvent, remove the paper before the solvent reaches the top, and work out Rf values.
  • Water purification: distil to make pure water and test the pH and for dissolved solids. A sample with dissolved solids leaves a residue when it evaporates.
  • Repeat measurements, find the mean and ignore anomalies, and say whether the results are repeatable and reproducible.

Key terms

Independent variable
The variable you change in an investigation.
Dependent variable
The variable you measure.
Control variable
A variable you keep the same to make it a fair test.
Repeatable
You get the same result if you repeat the investigation with the same method and equipment.

Common mistakes

  • Describing what to do without saying what is measured and what is kept the same. Every method needs the variables.
  • Calling a result accurate when it is repeatable. Accuracy is closeness to the true value; repeatable means you get the same result again.

Exam tip

In a method answer give the apparatus, what you change, what you measure, what you keep the same, and how many times you repeat it.

Free practice questions

7 questions, 16 marks. Answer, then press Check. The marking guide explains how the marks are worked out. Nothing is saved.

  1. Question 1 · Multiple choice[1 mark]

    Why is the start line on chromatography paper drawn in pencil?

  2. Question 2 · True or false[1 mark]

    True or false: doubling the concentration of a reactant, with everything else kept the same, usually increases the rate.

  3. Question 3 · Fill the gaps[1 mark]

    In the cooled tube, water vapour ___ to form liquid water.

    Word bank: dissolves · melts · condenses · evaporates

  4. Question 4 · Matching[4 marks]

    Draw one line from each part of the set-up to its job.

  5. Question 5 · Put in order[3 marks]

    Put the steps of the disappearing cross method in the correct order.

    Use the arrows to put these in the right order, first at the top.

    1. 1Stop the stopwatch when the cross can no longer be seen
    2. 2Swirl the flask and look down at the cross from above
    3. 3Repeat with each concentration, then calculate a mean time for each
    4. 4Add the measured volume of hydrochloric acid and start the stopwatch at once
    5. 5Measure sodium thiosulfate solution and water into a conical flask standing on a paper cross
  6. Question 6 · Sort into groups[5 marks]

    Complete the sorting task: put each quantity in the correct group for Kofi's investigation into the mass of dissolved solids in four water samples.

    The balance used for weighing

    Volume of sample put in the dish

    How the dish is heated

    Mass of solid left after evaporating

    Which water sample is tested

  7. Question 7 · Multiple choice[1 mark]

    At the start, where must the pencil start line be compared with the solvent?